Details
Specifications


The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Number of Channels2Total Power(Sum of Rated Power)300 WattsRated Power(RMS Continuous Power)100 Watts x 2 @ 4-Ohm150 Watts x 2 @ 2-Ohm300 Watts x 1 @ 4-Ohm BridgedDynamic Power(PVC/PowerCube®)120 Watts x 2 @ 4-Ohms 0° Res203 Watts x 2 @ 2-Ohms 0° ResBridgeableYesFrequency Response20Hz-20kHzInput Sensitivity150 mV - 12 VCircuit Topology ClassClass A/BEfficiency(average)69% @ 4-OhmTotal Harmonic Distortion(THD+Noise)4-Ohm:<1.0%2-Ohm:<1.0%Signal InputHi/Low Level:1 RCA PairSignal OutputLow Level:1 RCA PairTone Controls0dB to +14dB @ 12.5kHz0dB to +18dB @ 45HzCrossover ControlsHigh-Pass:50Hz - 250Hz @ 12dB/Octave ButterworthLow-Pass:50Hz - 250Hz @ 12dB/Octave ButterworthAll-Pass:YesRemote ControlsOptional Punch Level Control (PLC2) ReadyVisual IndicatorsPower/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: <0.5% THD2VIOLET: 1% THD3RED: 10%+ THDPower Wire Gauge8 AWG to 4 AWGPower Input ConnectorCaptive C-ClampSpeaker Wire Gauge8 AWG to 18 AWGSpeaker Output ConnectorCaptive C-ClampCoolingConvectionHeatsinkOperating Voltage9 - 16 VDCRecommended Fuse(not included)50 AAverage Current Draw(13.8V Music)23 AMax. Current Draw(13.8V Sinewave)45 ASuggested Alternator75 AIncluded In The BoxDimensions(H x W x D)2.38 x 7.76 x 9.86 (in)6.05 x 19.71 x 25.04 (cm)Shipping Weight9.5 Lbs. (4.3 Kg.)
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The P300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the P300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Number of Channels2Total Power(Sum of Rated Power)300 WattsRated Power(RMS Continuous Power)100 Watts x 2 @ 4-Ohm150 Watts x 2 @ 2-Ohm300 Watts x 1 @ 4-Ohm BridgedDynamic Power(PVC/PowerCube®)120 Watts x 2 @ 4-Ohms 0° Res203 Watts x 2 @ 2-Ohms 0° ResBridgeableYesFrequency Response20Hz-20kHzInput Sensitivity150 mV - 12 VCircuit Topology ClassClass A/BEfficiency(average)69% @ 4-OhmTotal Harmonic Distortion(THD+Noise)4-Ohm:<1.0%2-Ohm:<1.0%Signal InputHi/Low Level:1 RCA PairSignal OutputLow Level:1 RCA PairTone Controls0dB to +14dB @ 12.5kHz0dB to +18dB @ 45HzCrossover ControlsHigh-Pass:50Hz - 250Hz @ 12dB/Octave ButterworthLow-Pass:50Hz - 250Hz @ 12dB/Octave ButterworthAll-Pass:YesRemote ControlsOptional Punch Level Control (PLC2) ReadyVisual IndicatorsPower/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: <0.5% THD2VIOLET: 1% THD3RED: 10%+ THDPower Wire Gauge8 AWG to 4 AWGPower Input ConnectorCaptive C-ClampSpeaker Wire Gauge8 AWG to 18 AWGSpeaker Output ConnectorCaptive C-ClampCoolingConvectionHeatsinkOperating Voltage9 - 16 VDCRecommended Fuse(not included)50 AAverage Current Draw(13.8V Music)23 AMax. Current Draw(13.8V Sinewave)45 ASuggested Alternator75 AIncluded In The BoxDimensions(H x W x D)2.38 x 7.76 x 9.86 (in)6.05 x 19.71 x 25.04 (cm)Shipping Weight9.5 Lbs. (4.3 Kg.)
Promotions, new products and sales. Directly to your inbox.