MONITOR AUDIO CW8B 8″ POWERED SUBWOOFER

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 25.5 cm dimensions incorporate no fewer than three robust, similarly sized 8″ C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).

Features & Specifications

• System Format
  Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
• Lower Frequency Limit
  35 Hz (-6 dB)
• Amplifier Output
  350 W RMS @ < 1% THD+N
• Maximum SPL
  105.8 dBA
• Amplifier Classification
  Class D amplifier with Switch mode power supply (SMPSU)
• Inputs
  Stereo RCA LFE (RCA) LFE Balanced (XLR)
• EQ
  Flat/ Music/ Movie/ Impact
• Phase Control
  0 & 180 degrees
• Auto Sensing
  LFE Input <2mV Auto wireless audio input signal detection
• Auto Standby
  After approximately 15 minutes if no signal sensed Wireless audio source turned off
• Drive Unit Complement
  1 x 8″ (200 mm) C-CAM long throw driver, 2 x 8″ (200 mm) ABR
• Input Impedance
  > 20 ohms
• Mains Input Voltage
  110 – 120 Vac / 220 – 240 Vac 50/60 Hz (Manual Switch selection)
• Dimensions (Including Feet (H x W x D))
  270 x 260 x 276 mm (105/8 x 101/4 x 107/8″)
• Trigger Input
  5 – 12 V via 3.5mm mono mini-jack socket
• Power Consumption
  Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
• Weight (unpacked)
  9.52 kg (21 lb)
• Sold As
  Single Unit

Warranty: 5 years parts and labour against manufactures defects