Load image into Gallery viewer, MONITOR AUDIO CW10B 10″ POWERED SUBWOOFER
Load image into Gallery viewer, MONITOR AUDIO CW10B 10″ POWERED SUBWOOFER

MONITOR AUDIO CW10B 10″ POWERED SUBWOOFER

Vendor Monitor Audio
Regular price $1,499.00
Sale price $1,499.00 Regular price
Sale Call To Order
Unit price
/per 

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 30 cm dimensions incorporate no fewer than three robust, similarly sized 10″ C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).

Features & Specifications

  • System Format Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
  • Lower Frequency Limit 32 Hz (-6 dB)
  • Amplifier Output 400 W RMS @ < 1% THD+N
  • Maximum SPL 105.8 dBA
  • Amplifier Classification Class D amplifier with Switch mode power supply (SMPSU)
  • Inputs Stereo RCA LFE (RCA) LFE Balanced (XLR)
  • EQ Flat/ Music/ Movie/ Impact
  • Phase Control 0 & 180 degrees
  • Auto Sensing LFE Input <2mV Auto wireless audio input signal detection
  • Auto Standby After approximately 15 minutes if no signal sensed Wireless audio source turned off
  • Drive Unit Complement 1 x 10″ (250 mm) C-CAM long throw driver, 2 x 10″ (250 mm) ABR
  • Input Impedance > 20 ohms
  • Mains Input Voltage 110 – 120 Vac / 220 – 240 Vac 50/60Hz (Manual Switch selection)
  • Dimensions (Including Feet (H x W x D)) 315 x 305 x 320 mm (123/8 x 12 x 125/8″)
  • Trigger Input 5 – 12 V via 3.5 mm mono mini-jack socket
  • Power Consumption Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
  • Weight (unpacked) 12.64 kg (27 lb 12 oz)
  • Sold As Single Unit

Warranty: 5 years parts and labour against manufactures defects

Details

Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.

The compact rigid 18 mm MDF cubic cabinets with regular 30 cm dimensions incorporate no fewer than three robust, similarly sized 10″ C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).

Specifications

Features & Specifications

  • System Format Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
  • Lower Frequency Limit 32 Hz (-6 dB)
  • Amplifier Output 400 W RMS @ < 1% THD+N
  • Maximum SPL 105.8 dBA
  • Amplifier Classification Class D amplifier with Switch mode power supply (SMPSU)
  • Inputs Stereo RCA LFE (RCA) LFE Balanced (XLR)
  • EQ Flat/ Music/ Movie/ Impact
  • Phase Control 0 & 180 degrees
  • Auto Sensing LFE Input <2mV Auto wireless audio input signal detection
  • Auto Standby After approximately 15 minutes if no signal sensed Wireless audio source turned off
  • Drive Unit Complement 1 x 10″ (250 mm) C-CAM long throw driver, 2 x 10″ (250 mm) ABR
  • Input Impedance > 20 ohms
  • Mains Input Voltage 110 – 120 Vac / 220 – 240 Vac 50/60Hz (Manual Switch selection)
  • Dimensions (Including Feet (H x W x D)) 315 x 305 x 320 mm (123/8 x 12 x 125/8″)
  • Trigger Input 5 – 12 V via 3.5 mm mono mini-jack socket
  • Power Consumption Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
  • Weight (unpacked) 12.64 kg (27 lb 12 oz)
  • Sold As Single Unit

Warranty: 5 years parts and labour against manufactures defects

Subscribe to our newsletter Subscribe to our newsletter