Zen Can Fully-balanced. 1,600mW. Battleship headphone amplifier.

Balanced to thrill

The ZEN CAN has trickle-down Class A discrete balanced circuitry from iFi audio’s US$1,699 flagship Pro iCAN. With 15.1v @300 Ohms on tap, it has serious power that will make even difficult-to-drive headphones thump to the beat.

• Class A discrete output buffer from the flagship Pro iCAN using Op-Amp (OV2637A)
• FET input avoids loading volume control – low distortion/noise
• SE inputs (1M Ohm) ensures loading of the source so always in Class A operation
• Output amplifier gain of four steps in +6dB perfect for headphone matching

Brings the venue to you.

Audio recordings are made to be listened to via speakers. When played back on headphones, the sound feels limited to being ‘inside your head’. It does not have the spaciousness it was meant to have.

Our 3D special sound circuit solves this:

• Stereo image that is truly out of your head, in front with height, width & depth
• Without colouration or loss of resolution
• All analogue circuitry (i.e. without costly and complex digital signal manipulation)

Satisfies all listeners.

Ace of XBass

Behind XBass is our active EQ circuit which meets a common gripe with headphones head-on, a lack of bass.

Open-back headphones in particular, let all frequencies (especially those precious bass frequencies that the drivers generate so little of) leak freely out of the back instead of trapping and redirecting them back to your ears.

XBass equalisation is a much more elegant solution to bass correction than seen elsewhere. It consists of active and passive components and its frequency response curve corrects their low-end response problems with precision.

Packed with premium goodness

Underpinning the Balanced and Active EQ circuitry are:

• Panasonic ECPU capacitors
• TDK C0G (Class 1) ceramic capacitors
• iFi/AMR ‘OV’ ‘Operationsverstärker’ series op-amps
• MELF resistors
• Texas Instruments low-noise ICs
• muRata capacitors and
• Tokyo Cosmos Electric Co. (TOCOS) multi-track potentiometer, with exceptional channel matching (use above 11 o’ clock)

SpecificationsInputs - 4.4mm Pentacon BAL4.0V nominal @ 0dBFS, 24 kOhm ZinInputs - 3.5mm Jack SE2.0V nominal @ 0dBFS, 1 MegOhm ZinInputs - RCA L/R Socket SE1.0V nominal @ 0dBFS, 1 MegOhm ZinMax Output>15.1V/385 mW (@ 600 Ohm), >11.0V/1890 mW (@ 64 Ohm)Output Impedance (HP) - BAL<2 OhmsOutput Impedance (HP) - SE<1 OhmZout<200 OhmsTHD & N - Balanced< 0.0007% (4V out, 600 Ohm, 1kHz)THD & N - S-E<0.006% (@ 100 mW/1.27V 16 Ohm)Max. Input - Balanced7.4V RMSMax. Input - RCA3.8V RMSMax. Input - 3.5mm1.92V RMSGain0dB, 6dB, 12dB and 18dBFrequency Response20Hz - 20kHz (+0dB / -0.03dB)Power consumption - Max Signal~13WPower consumption - No Signal~5WInput voltageDC 5V/2.4A, AC 100 -240V, 50/60HzDimensions160(w) x 117(d) x 35(h) mm 6.3" x 4.6" x 1.4"Net weight515g (1.14 Ibs)Warranty period12 months