Punch 500 Watt 2-Channel AmplifierP500X2

The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.

The P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.

FEATURES AT A GLANCE

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• 12dB/octave Butterworth crossover
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• On-board Punch EQ with +18dB boost @ 45Hz
• Cast aluminum heatsink
• Muted turn on
• Stealth top mounted control panel
• Short circuit protection
• Over current protection
• 1 Year Warranty

Number of Channels2Total Power(Sum of Rated Power)500 WattsRated Power(RMS Continuous Power)150 Watts x 2 @ 4-Ohm250 Watts x 2 @ 2-Ohm500 Watts x 1 @ 4-Ohm BridgedDynamic Power(PVC/PowerCube®)223 Watts x 2 @ 4-Ohms 0° Res365 Watts x 2 @ 2-Ohms 0° ResBridgeableYesFrequency Response20Hz to 20kHz +/- 1.0dBInput Sensitivity150 mV - 12 VCircuit Topology ClassClass A/BEfficiency(average)73% @ 4-OhmTotal Harmonic Distortion(THD+Noise)4-Ohm:<1.0%2-Ohm:<1.0%Signal InputHi/Low level:1 RCA pairSignal OutputLow level:1 RCA pairTone ControlsPunch EQ2 Bass: 0dB to +18dB @ 45Hz and/orPunch EQ2 Treble: 0dB to +12dB @ 12kHzFunction depends upon LP/AP/HP switch positionCrossover ControlsHigh-Pass:50Hz-250Hz @ 12dB/octave ButterworthLow-Pass:50Hz-250Hz @ 12dB/octave ButterworthAll-Pass:YesRemote ControlsOptional Punch Level Control (PLC2) ReadyVisual IndicatorsPower/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: <0.5% THD2VIOLET: 1% THD3RED: 10%+ THDPower Wire Gauge4 AWGPower Input ConnectorCaptive C-ClampSpeaker Wire Gauge8 AWG to 18 AWGSpeaker Output ConnectorCaptive C-ClampCoolingConvectionHeatsinkOperating Voltage9 - 16 VDCRecommended Fuse(not included)80 AAverage Current Draw(13.8V Music)40 AMax. Current Draw(13.8V Sinewave)80 ASuggested Alternator75 AIncluded In The BoxDimensions(H x W x D)2.38 x 7.76 x 13.28 (in)6.05 x 19.71 x 33.73 (cm)Shipping Weight12.3 Lbs. (5.57 Kg.)