Details
Specifications
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
Number of Channels2Total Power(Sum of Rated Power)1000 Watts RMSRated Power(RMS Continuous Power)300 Watts x 2 @ 4-Ohm500 Watts x 2 @ 2-Ohm1000 Watts x 1 @ 4-Ohm BridgedDynamic Power(PVC/PowerCube®)401 Watts x 2 @ 4-Ohms 0° Res656 Watts x 2 @ 2-Ohms 0° ResBridgeableYesFrequency Response20Hz to 20kHz +/- 1.0dBInput Sensitivity150 mV - 12 VCircuit Topology ClassClass A/BEfficiency(average)69% @ 4-Ohm64% @ 2-OhmTotal Harmonic Distortion(THD+Noise)4-Ohm:<1.0%2-Ohm:<1.0%Signal InputHi/Low level:1 RCA pairSignal OutputLow level:1 RCA pairTone ControlsPunch EQ2 Bass: 0dB to +18dB @ 45Hz and/orPunch EQ2 Treble: 0dB to +12dB @ 12.5kHzFunction depends upon LP/AP/HP switch positionCrossover ControlsHigh-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave ButterworthRemote ControlsOptional Punch Level Control (PLC2) ReadyVisual IndicatorsPower/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: <0.5% THD2VIOLET: 1% THD3RED: 10%+ THDPower Wire Gauge4 AWGPower Input ConnectorCaptive C-ClampSpeaker Wire Gauge8 AWG to 18 AWGSpeaker Output ConnectorCaptive C-ClampCoolingConvectionHeatsinkOperating Voltage9 - 16 VDCRecommended Fuse(not included)140 AAverage Current Draw(13.8V Music)70 AMax. Current Draw(13.8V Sinewave)140 ASuggested Alternator100 AIncluded In The BoxDimensions(H x W x D)2.38 x 7.76 x 15.03 (in)6.05 x 19.71 x 38.18 (cm)Shipping Weight15 Lbs. (6.80 Kg.)
The Punch P1000X2 is a 2-channel stereo amplifier capable of producing 500 Watts into each channel at 2-Ohms. The P1000X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The P1000X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk - that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
Number of Channels2Total Power(Sum of Rated Power)1000 Watts RMSRated Power(RMS Continuous Power)300 Watts x 2 @ 4-Ohm500 Watts x 2 @ 2-Ohm1000 Watts x 1 @ 4-Ohm BridgedDynamic Power(PVC/PowerCube®)401 Watts x 2 @ 4-Ohms 0° Res656 Watts x 2 @ 2-Ohms 0° ResBridgeableYesFrequency Response20Hz to 20kHz +/- 1.0dBInput Sensitivity150 mV - 12 VCircuit Topology ClassClass A/BEfficiency(average)69% @ 4-Ohm64% @ 2-OhmTotal Harmonic Distortion(THD+Noise)4-Ohm:<1.0%2-Ohm:<1.0%Signal InputHi/Low level:1 RCA pairSignal OutputLow level:1 RCA pairTone ControlsPunch EQ2 Bass: 0dB to +18dB @ 45Hz and/orPunch EQ2 Treble: 0dB to +12dB @ 12.5kHzFunction depends upon LP/AP/HP switch positionCrossover ControlsHigh-Pass/Low-Pass (HP/LP): 50Hz-250Hz 12dB/octave ButterworthRemote ControlsOptional Punch Level Control (PLC2) ReadyVisual IndicatorsPower/Protect/Thermal LEDInput Clip LED3Output Clip LED1,2,3LED Color Legend:1BLUE: <0.5% THD2VIOLET: 1% THD3RED: 10%+ THDPower Wire Gauge4 AWGPower Input ConnectorCaptive C-ClampSpeaker Wire Gauge8 AWG to 18 AWGSpeaker Output ConnectorCaptive C-ClampCoolingConvectionHeatsinkOperating Voltage9 - 16 VDCRecommended Fuse(not included)140 AAverage Current Draw(13.8V Music)70 AMax. Current Draw(13.8V Sinewave)140 ASuggested Alternator100 AIncluded In The BoxDimensions(H x W x D)2.38 x 7.76 x 15.03 (in)6.05 x 19.71 x 38.18 (cm)Shipping Weight15 Lbs. (6.80 Kg.)
Promotions, new products and sales. Directly to your inbox.